Description
| Dimensions | 380 × 320 × 390 mm |
|---|---|
| Brand | NORDBERG |
| SKU | CMT31AB |
| Main unit power source | ~ 220 V / 3 A |
| Ultrasound cleaner power source | ~220 V / 2 A |
| Main unit power | 200 W |
| Ultrasound cleaner power | 160 W |
| Ultrasound cleaner heater power | 100 W |
| Operating pressure | 0.1-6.5 bar |
| Range of simulated speeds | 100-9900 rpm; step: 100 rpm |
| Pulse width | 0.1-30 ms; step 0.1 ms |
| Time range | 60-3600 s |
| Ultrasound cleaning timer | on, 5-20 minutes |
| Ultrasound cleaner heating temperature | 20-80 °C |
| Fuel tank capacity | 4 L |
| Warranty | 1 year Service Warranty |
| Package size | 1 Box: 450 x 440 x 455mm 18 kg |
Functional
- The operating principle of the unit is to simulate different engine operating conditions by means of pressurizing the injectors to be serviced with test fluid and a pulse signal, as well as heating the cleaning fluid and applying ultrasonic waves that remove carbon and deposits.
- The NORDBERG CMT31AB creates optimal conditions for injector performance testing and cleaning to improve engine performance, reduce fuel consumption and extend the life of fuel injectors.
Functions
- Ultrasonic cleaning
- Uniformity / atomization test
- Leakage test
- Injection flow test
- Automatic test
- On-vehicle cleaning function
Advantages
- Types of injectors serviced: SPI, MPI, SFI, PFI
- Freestanding ultrasonic bath (length/depth 13,5×6,5 cm) with heating and timer provides full cleaning of 6 injectors, bracket for eight injectors
- Automated drainage of test fluid
- The automatic test mode, possible thanks to the built-in microcomputer, contains six different test options to test the injectors on many parameters, which are carried out sequentially
- A control panel with buttons with clear symbols and a digital display provide easy and accessible operation of the unit
- Microcomputer provides control of fuel pressure and allows to adjust its range
Compact and mobile design - Set of adapters and sealing rings included
Contents
- Injector cleaning kit
- Fuel distributor kit, including adapter 2 (D13.5)
- Adapter 1 for injector with top fuel feed (D10.5) (6 pcs)
- Pulse signal cable #1 for one injector (6 pcs)
- Support adapter with wide edge (D11) (6 pcs)
- Ultrasonic reservoir
- Adapter with large thread for top-feed fuel injector (M12X1.75) (6 pcs)
- Adapter with Swiss thread for top-feed injector fuel (M10x1.0) (6 pcs)
- Impulse signal cable No. 2 for one injector (6 pcs)
- Support adapter with wide edge (D14) (6 pcs)
- Plug (G1/4″) (5 pcs)
- Adjusting bolt (2 pcs)
- Funnel
- Sealing rings NBR (1 set)
- Case
- Nut with lock washer (2 pcs)
- Adjusting bolt (2 pcs)
- Sprayer
- Power cable
